COMMITS
/ lib/serial.cpp August 25, 2024
R
serial: Set IRQ for serial device 10
Rene Stange committed
August 6, 2024
R
FIXED: serial: m_pCharReceivedHandler was not inited
Rene Stange committed
August 5, 2024
R
serial: Allow setting mark/space parity and per char receive
Rene Stange committed
February 20, 2024
R
FIXED: serial: Must always disconnect IRQ on RPi 5
Rene Stange committed
February 12, 2024
R
FIXED: serial: Driver without IRQ did not unload on RPi 5
Rene Stange committed
November 27, 2023
R
serial: Re-order devices for Raspberry Pi 5
Rene Stange committed
November 24, 2023
R
serial: Support UART0-5 of RP1
Rene Stange committed
November 14, 2023
R
Initial support for Raspberry Pi 5
Rene Stange committed
August 14, 2021
R
serial: Use different device names on RPi 4
Rene Stange committed
June 21, 2021
R
serial: Support setting line parameters
Rene Stange committed
April 23, 2021
R
serial: Enable FIFO in non-interrupt mode too
Rene Stange committed
September 20, 2020
R
FIXED: May deadlock with REALTIME
Rene Stange committed
February 16, 2020
R
CSerialDevice: Support additional devices of RPi 4
Rene Stange committed
July 6, 2019
R
System option SERIAL_GPIO_SELECT added
R. Stange committed
December 19, 2018
R
Base library ported to AArch64
R. Stange committed
April 11, 2018
R
CSerialDevice::RegisterMagicReceivedHandler() added
rsta2 committed
April 9, 2018
R
Added methods to CSerialDevice for Arduino emulation
rsta2 committed
April 4, 2017
R
FIQ support added
rsta2 committed
April 1, 2017
R
CSerialDevice supports interrupt mode and FIFO now
rsta2 committed
March 9, 2017
R
Zero W support added
rsta2 committed
November 22, 2016
R
Define REALTIME added
rsta2 committed
November 8, 2016
R
Peripheral barriers explicit defined
rsta2 committed
November 7, 2016
R
Initial commit of development version "26alpha"
rsta2 committed
October 30, 2016
R
Note on Raspberry Pi 2 B v1.2 added to README.md
rsta2 committed
March 21, 2016
R
Raspberry Pi 3 supported
rsta2 committed
November 8, 2015
R
May send log messages to GDB client now
rsta2 committed
November 6, 2015
R
Can be source-level debugged on Raspberry Pi 2 now
rsta2 committed
September 29, 2015
R
Serial baud rate may be up to 3 Mbps now
rsta2 committed
March 12, 2015
R
Multi-core support on Raspberry Pi 2 added
rsta2 committed
October 29, 2014
R
Changes for Step 3
rsta2 committed